International Journal of Advances in Engineering & Scientific Research

International Journal of Advances in Engineering & Scientific Research

Print ISSN : 2349 –4824

Online ISSN : 2349 –3607

Frequency : Continuous

Current Issue : Volume 1 , Issue 4
2014

PARAMETRIC OPTIMIZATION IN TURNING OPERATION OF A CNC LATHE MACHINE

*Ravinder Singh , **Netrapal Singh , ***Rupesh Kumar , ****Dr. Anil Aggarwal

*(M.Tech Scholar), RITM ,Palwal, India,    **(HOD MECH.) RITM ,Palwal, India,    ***(M.TECH Scholar) RITM ,Palwal, India,     ****(Director)  RITM ,Palwal, India

DOI : Page No : 52-58

Download Full Article : PDF Check for Updates


ABSTRACT

 

Turning is the process in which work piece is involves in machining operation, turn to getting desired shape at any dimension. As stainless steel is one of the most important and widely used materials in these days; so it is being chosen as the work piece material. The machining parameters are chosen to be cutting speed, feed and depth of cut. The main aim of the experiment is to minimize cutting forces (feed force, the thrust force and cutting force). The aim of the experiment is to minimize the forces, to reduce the chip thickness, to reduce the surface roughness and to reduce the tool wear & the main aim is to reduce operating cost. The experiment was carried out by a CNC lathe, and the forces were measured by a dynamometer. The mode of machining is dry machining. The System of all machine are FANUC but only a few machine are of SIMENS, analysis are used to obtain the optimum parameters for better machining. Minitab is statistical software which is used to do the analysis part.